SL2-141/SL2-141-I ADSL Router. User’s Manual. ³ The boot loader contains very simple web page to allow the users to update the run-time firmware image.

Reset Siemens SL2-141 router to factory defaults To reset the Siemens SL2-141 to its default settings, you have to do the following steps: • Turn on router • Press Factory Reset button and hold for at least 15 seconds • Device restarts automatically • Default settings have been restored The unit will reboot automatically. Once the power light stops blinking, the unit has been reset and is ready to use. Resetting the router does not reset the firmware to an earlier version, but it will change all settings back to factory defaults. Where are you placing the Siemens SL2-141 router in the house?

You wouldn’t think about this at first, but where you place your Siemens SL2-141 also has a bearing on your security. Place the Siemens SL2-141 router as close as possible to the middle of your house.

The first benefit is that all the rooms in your house have the same access to the Internet. The second benefit is that you don’t want to have your wireless signal range reach too much outside your house, where it can be easily intercepted by cybercriminals.

For this reason, don’t place your Siemens SL2-141 router next to a window, since there’s nothing to obstruct the signal going outside your house.

I am at jamshedpur and {SIZE=2]when[/SIZE] I try to download, it is saying 'Dear customer, we cannot extend this service to you as you are in different network '. Could you pls post the full link for downloading and procedure for updating the firmware? {SIZE=2]Thanks.[/SIZE] Why you need to update the firmware / Port forwarding options not available? Are you on 'Dialer' mode or PPP/PPPoE( UserId/PW entered in modem )?

No upgrade available for sl2 _141 siemens WIFImodel. In 'Always ON' mode also try 192.168.1.1/secur_menu.html REF: BSNL Broadband Customers Please note: This software is ONLY applicable for UTStarcom (both Type 1 and Type 2), Nokia Siemens Networks(Type 1 ONLY) and ZTE Modems (both Type 1 and Type 2) supplied by BSNL. Customers using Teracom CPEs click here (You may do this activity only once) Only BSNL Broadband Customers having following Customer Premises Equipment can avail this Service. System Requirements Size Download Self Care Software Internet Explorer Version -> 5.0 or above CPU speed required XP->300 MHz CPU speed required 98/2k->233 MHz RAM required XP->128 MB RAM required 98/2k->64 MB Disk space required XP->250 MB Disk space required 98/2k->150 MB 133 MB Click here to download the BSNL SELF CARE Software Please provide your feedback at.

Copyright@2009, Bharat Sanchar Nigam Ltd. All rights reserved.

Kmspico v 1012 final activation windows office 2017. Some main features are below: • Lifetime activation with 100% pure and genuine. • Activate Microsoft Office 2010 to 2016 and 365 – both 32 bit and 64 bit.

Give feedback before attempting any FW upgrade. Not available for your model. Reduce Font size. Go direct to TRY here: CPE firmware Upgrade Application User Guide. My modem was not working. I gave to BSNL for repairing; but they were unable to repair. An external party has repaired it; but DSL is not responding.

I can now access the modem thru LAN as well as WLAN. The current displayed settings are: I have tried all options like reboot, reset, even Hard reset thru pin by pressing the reset switch; but nothing was helpful. So I was thinking reinstalling the firmware will help.

If you can give any other suggestion, you are well come. Please see 'Sticky' thread Wa 3002_g4 quick reference guide in this forum and see the screen shots for BSNL settings. Unit seems to be Ok.